Shoutout to CodenameV for bringing PCSX_ReARMed to my attention!
Tonight I have uploaded the source and binaries for PCSX_ReARMed. This is an amazing emulator that is running a lot of PSX games at full speed. I have not been able to get sound to work through HDMI yet, but since my last reformat, I haven’t been able to get sound working on anything, so I’m kinda bummed about that. I’m hoping some of you have better luck with the audio.
Good News Everyone! I was able to recover my corrupted filesystem. I also completed a large chunk of a major project I’m working on at the University. This one piece of code has been bugging me for a couple of days, and I finally solved it today, so I feel a lot better. I’m exhausted but hopefully tomorrow I can do some more emulation testing.
I have been testing PCSX_ReARMed for the Pi and it’s working really well. NeoPop-SDL (Neo Geo Pocket Color) emulator is working as well, though it doesn’t fullscreen properly. Mednafen 0.8 (a multi console emulator) is already in the Raspbian Repos. Mednafen 0.9 has trouble compiling out of the box but I was able to get past the issues and it’s working. I’ll be posting binaries this week as well as some tutorials.
So this week started off cool then took a turn for suckage. I’ve been working on getting two more emulators working. One is a Neo Geo Pocket Color emulator, and it works, but has some minor issues. The other is another mass emulator like MESS. The older version compiles, but the latest one errors out.
The reason I am not posting binaries at the moment is because my SD card’s filesystem got corrupted during a test I was doing, and won’t boot. I’ve made a bit for bit backup of the card using DD, and I’m going to try and retrieve as much data from it as possible. Luckily I have other SD cards to use.
I was hoping to have the binaries for NeoPop available tonight but I have to recompile them on the new SD card. If you want you can click the link above and download the source and compile it yourself.
The other emulator I’ve been working on compiling is called Mednafen. The old version (0.8) is available in Raspbian repos, so just do sudo apt-get install mednafen and you should be good to go. Make sure you run it once, then edit the ./mednafen/mednafen.rc file. There is a part that says video and it tries to use opengl, set it to SDL and you should be good to go.
It’s been a long week, and I am really glad I have a long weekend to sleep in.
When the Arduino Leonardo was announced I was really excited to see it have built in USB HID support and could act as a keyboard, mouse, or joystick. I was even more excited to find out that my year old Teensy++ (Arduino compatible board) was based on the same chipset that the Leonardo now uses, and is able to act as a keyboard as well!
This is a new feature that was introduced in the Arduino 1.0 IDE. You can now send keyboard presses with this simple line of code: Keyboard.write(‘a’); If I wanted the Up joystick to be the up arrow on the keyboard, I would just use: Keyboard.write(0x0E); .
My goal is to use my Neo Geo AES controllers as an input for MAME. The Neo Geo pads don’t have any control boards built into the unit. The console itself interprets each pin individually, just like an actual arcade board. The pad uses a standard midi gameport (DA-15) connector, with each pin representing one button.
My idea is to make a Neo Geo pad to usb adapter using the Teensy++ as go-between. The Neo Geo pins will be wired up to the digital pins on the Teensy, and the Teensy Arduino sketch will interpret each button press as a keyboard press.
I’m looking forward to working on this project. I hope everyone has a great weekend and a restful Labor Day.
Happy Friday! This week brings some really cool things for the Raspberry Pi. First up, we have a Playstation Emulator that works under X in on the Pi. It’s called PCSX, it’s OpenGL ES enabled, and while it’s not runnign at full speed, it’s a really cool display of the technology that can be powered by the Pi. Binaries and Instructions below.
Select Load, then navigate the directory where you saved the CD image
Select your game then press enter
This emulator is far from perfect on the Raspberry Pi. Some games won’t work, frame rates are wild, and it can be a bit frustrating, but who cares! It’s a freakin’ Playstation emulation on the Raspberry Pi!
Lo all. Happy Friday everyone. This post is going to be kind of short, as I somehow hurt my back and I can’t find any really good position to type in.
This week the Via APC single board computer went on sale at Newegg. This is kind of a competitor to the Raspberry Pi, except it only runs Android 2.3 right now. It’s also more locked down than the Pi, and is almost twice the price, at $55 after shipping. I haven’t had it long enough to do a good review, and yes, I know I sound negative about it, but what I’m really hoping is it will be able to run Unity 3D engine games. It’s already impressed me with it’s out of the box Youtube app.
Unity is an awesome game and physics engine, and to have an ARM based development board that can output 1080P and has normal PC interfaces could be pretty awesome for Indie Arcade Development.
Heres an unboxing video I took yesterday:
Have a good weekend everyone. I have a surprise for tomorrow 🙂
I was very excited when I found out that on Monday, I made the frontpage of the Raspberry Pi website. A big shout out to Liz for mentioning me and linking back here. It made my day!
I really love working on this little computer. I’m learning so much and using skills that I took for granted. It’s really pushing some of the boundaries I had setup against myself. I’m glad to be getting past them.
I’m also thinking of getting one of these and building a RaspberryPi bartop machine:
Today I present a tutorial on compiling Descent for your Raspberry Pi running Raspbian. At the end of this tutorial you should have binaries ready to go and and a playable version of the game Descent. If you don’t want to wait for the compile, I have the binaries ready for you. Just skip to the end.
You now have to patch the source code with the diff files.
cd into the source code directories.
patch -p1 < ../d1x-rebirth-rpi.diff
patch -p1 < ../d2x-rebirth-rpi.diff
We are now ready to compile!
On the command line enter these two commands:
Wait around 30 – 40 minutes.
If there are no errors you should now have a d1x-rebirth executable file in your directory!
Wait around 30 – 40 minutes.
If there are no errors you should now have a d2x-rebirth executable file in your directory!
You now need the data files that holds the actual game levels, sounds, artwork, etc. These are in .hog, .pig, and .ham (descent 2 only) files. You can get the game content from dxx-rebirth, the creators of this port. They also have links to the shareware files: